Can we install the lithium-ion battery with the existing inverters on the market? The normal inverters installed in the homes and offices have different chargers for charging Lead-acid or Tubular batteries. These built-in chargers in the inverter/UPS can damage the lithium ion battery, and lithium battery life may be less than that of the tubular battery.
What are the Tubular Lead Acid Battery Health Hazards in Inverter/UPS Industry? People using Tubular Lead Acid batteries at homes and offices are not aware of the consequences regarding the health hazards of these battery institutions.
When they charge and discharge, the Ttubular Lead-acid batteries create a lot of fumes, which are healed knowingly and unknowingly by the people around them. World Health Organisation has been warning about the health hazards resulting from the pollution of Lead in different areas and is trying to create awareness regarding Lead poisoning. So I thought let me also make people aware regarding the risks of Tubular Lead Acid battery, which is being installed by the people inside their homes and offices, and no one knows how dangerous it can be when it spreads the lead fumes which are inhaled especially by the kids.
Can we install a Lithium battery with existing Inverters?https://techenclave.com/threads/lithium-iron-phosphate-lifepo4-battery-for-inverter-solar-in-india.202904/
Normal Inverter with two tubular lead acid batteries
24-volt lithium battery wall mount System with 2.4KWh lithium battery capacity
The retrofit of the existing Inverter with the Lithium-ion battery needs to be understood very well before implementing the retrofit of the lithium battery with the existing tubular lead Acid battery. As the charging technique for the lead acid battery is quite different from the lithium battery, the lithium battery will not be able to give the life that it’s designed for.
Also, another challenge is that the Lithium battery has built-in BMS, which remains on when the battery of smaller sizes of 12 V and 24 Volts are made, continuously discharging the battery. This is another challenge, as keeping the battery in the store for more than one or two months causes the battery to deep discharge.
Even when the low battery happens in the Inverter, if we don’t get power back for 2 to 3 days, the chances of the lithium battery going into Deep discharge are very high.
We have designed our Lithium battery BMS to go into sleep mode if the low battery happens to save the BMS power so that BMS consumption does not drain the Lithium battery.
So we have designed the Lithium-ion battery bank with a BMS, a heavy-duty BMS controlled through the MCB and fan to keep that battery cool. There is a buzzer and LED indications to show the status of the lithium battery, and this is a patented technology by which this lithium life PO4-based battery can be installed with any kind of Inverter available on the market. The charging inside the BMS is regulated according to the Lithium battery requirement and can give a life of 10 years.https://suvastika.com/benefits-of-lithium-battery-in-inverter-ups/
The Lithium battery weight is 8 Kgs compared to 62 Kgs of 150 Ah tubular battery, which requires two people to carry the battery. The transportation of tubular batteries is a big headache, especially when they are being installed or replaced.
It would be best to have a trolley to keep the battery, which always gets damaged over time due to the heavy weight of batteries and inverters. This Lithium battery comes in a matching metal box, which can be installed with the existing Inverter and does not need any trolley.
The existing Inverter with a Tubular battery emits Lead fumes, which is dangerous for the whole family, especially kids and older people. This lithium battery is completely safe; no fumes emit from the batteries as they are completely sealed.
Retrofit lithium battery with existing Inverter/UPS
It doesn’t require space, and no water refilling or maintenance is required.
The existing inverters can easily charge the lithium battery in 4 to 5 hours compared to the 15 hours needed to charge the tubular battery. So, retrofitting the lithium-ion battery with the existing Tubular lead Acid battery has a lot of advantages.
1. So, the result is that Su-vastika designs the lithium battery with BMS to run with any local inverter/UPS in a 12/24/48-volt configuration.
2. The lithium LifePO4 battery is a very lightweight and good-looking Product in a small package. It has all the electronic controls with an LED display fan and MCB, which looks like a sophisticated Electronic product.
3. This is a pollution-free and no-maintenance lithium battery pack.
4. It can be charged in 3 to 4 hours compared to a tubular lead acid battery, which takes 15 hours to charge completely.
So, in this article, we have clearly described that the new lithium battery designed by Su-vastika can be installed with any brand or type of inverter/UPS having a 12V battery with having 100 to 200 Ah Lead Acid battery installed.
Su-vastika
