Solar Hybrid PCU PWM 1100/12V
Technical Specifications
MODEL & DISPLAY | |
---|---|
Model Name | Solar Hybrid PCU PWM 1100/12V |
Display Type | LCD |
Battery Voltage | 12V |
Technology | Latest Bi-directional Technology |
Solar Charge Controller | PWM |
GRID INPUT PARAMETERS | |
Input Voltage Range (WUPS Mode) | 105V-290V |
Input Voltage Range (UPS Mode) | 185V-265V |
Output Voltage | Same As Input |
Battery Charging Current From Mains | 2.5A, 5A, 10A, 15A (User Selectable) |
Battery Charging Current Enable/Disable From Mains | User Selectable |
Charging Current Sharing Between Solar And Mains | Yes |
Power Usage Priority | SMB – Yes, SBM – Yes, MB – Yes (S=Solar, B=Battery, M=Mains) |
CHANGE OVER TIME | |
UPS Mode | ≤ 8 ms |
WUPS Mode | ≤ 20 ms |
SOLAR PARAMETERS | |
Input PV Voltage Range, Voc | 50V Max |
PV High Voltage | 55V ± 2V |
Input Charging Current, Imax | 40ADC± 2ADC |
Max Battery Charging Current | 40ADC± 2ADC |
Over Current Cut Off With Auto Restart | >42ADC |
OUTPUT PARAMETERS | |
Output Waveform | Pure Sine Wave |
Output Frequency | 50.0 ± 0.1Hz |
Total Harmonic Distortion (THD) | ≤ 3% |
PROTECTIONS | |
Overload/Short Circuit At Mains Mode | Mains MCB Will Trip |
Battery Overcharge | Battery High Cut |
Overload Protection | Yes With 8 Times Auto Reset |
Short Circuit Protection | Yes With 4 Times Auto Reset |
Over Temperature Protection | Yes High Temperature Shutdown |
Automatic Temperature Compensation (ATC) | -10°C to 60°C |
Operating Temperature | -10°C to 45°C |
Solar/Battery Reverse Protection | Yes |
Reverse Leakage Current Flow | Yes |
Thermal Management/Cooling | Fan Will Turn On At Specified Load |
Automatic Charger Restart Time After High Current | 3.5 Min |
Solar Hybrid PCU is called Solar Power Conditioning Unit that works on Grid power & Solar power along with the battery to store the Energy from the grid power & the solar power, gives backup power in case of a power failure, uses Solar Energy to run the load on the Grid, Solar, Battery and create a balance of power.
Su-vastika Solar Hybrid PCU PWM has a feature where the battery charging is done through Solar Energy, and once the battery is charged, it shifts the emphasis from Grid to Solar energy and saves the power bills. It comes with Inbuilt Solar Charge Controller based on PWM technology. So in layperson’s terms, Solar Hybrid PCU is a Solar System which provides power to the house and office in case of a power failure, and it saves the power bill by running the loads on the Solar power even when the grid power is available.
Solar Hybrid PCU is required in areas with a Grid, but power cuts or outages also occur. Solar Grid feed system does not have storage, so this Solar PCU provides power in case of Power failures or power cuts. These are called Stand Alone Inverters also.