50/60Hz Automatic Switching Technology

An inverter, along with the charger, is a device that converts direct current (DC) to alternating current (AC). Also, the Charger part charges the battery from the primary Source or main Power having 50 or 60 Hz Frequency. The frequency of AC power varies depending on the country or region. For example, the frequency in North America is 60Hz, while Europe’s is 50Hz.

There are three significant Voltages and Frequency standards being followed in the world 220V/50Hz, 220/60Hz, and 110/60Hz. Most of companies design separate Inverters/UPS on either 220/50Hz or 220V/60Hz, or 110/60Hz as they have different frequencies in those countries. A 50/60Hz compatible inverter can operate on 50Hz- and 60Hz power sources.

We at Su-vastika have universal compatibility as far as 50 or 60 Hz frequency is concerned. Please check our models, where these products work on both frequencies automatically. When they sense the frequency in the mains mode, they bypass the same frequency, and when the Power goes automatically, they begin providing Power on the same frequency.

This feature is critical as it helps us send the same model to a few countries with the Power of 220/60 Hz or the nations with an emphasis of 220V/50 hz. The product is standard and can be installed in any country.

Lithium Battery Compatible

Su-vastika introduces advanced inverter/UPS models that are compatible with Lithium, providing enhanced performance and efficiency. These inverters are specifically designed to work seamlessly with lithium-ion battery systems, offering reliable and sustainable power solutions for various applications. We have provided the settings in our UPS and user can select Lithium battery. Accordingly, the user can set the grid charging current from the settings as per the size of the Lithium battery chosen. We have designed the LifePO4 chemistry in our UPs and not the Lithium-ion as the Lithium-ion and Lithium LifePO4 technologies are very different from each other. In the Lithium LifePO4, you will get a better life, faster charging and better safety as well.

Fast Switching- Intelligently Changing Between Mains And Backup

Traditional inverters/UPS have higher switching times. This means your appliances will reset during the changeover between mains to backup, but Su-vastika’s UPS is blazingly fast. It automatically detects a power cut or voltage fluctuation and switches to its backup mode in milliseconds. So you and your appliances won’t even know there was a power cut. This means your computer, TVs, Satellite receivers, Wi-Fi, and other critical equipment can run uninterrupted without resetting.

Pure Sine Wave Technology

Many inverters still provide a square wave output, which is unhealthy for your appliances and creates humming noise in the fans and appliances.

Su-vastika’s Pure Sinewave UPS is designed to provide your appliances with a smooth, Pure Sine-wave power output better than the Grid power we get.

Bi-directional Technology

Su-vastika’s PURE SINE WAVE UPS 2300/24V LED works on the Revolutionary Bi-directional technology. A bi-directional technology is a technology that allows for two-way charging due to its ability of two-way conversion—from AC to DC and from DC to AC. A bi-directional technology uses the same PWM (Pulse Width Modulation) based MOSFET (metal–oxide–semiconductor field-effect transistor) circuit to charge and discharge the battery.

Inbuilt Isolation Transformer

Our UPS have Built-in Isolation Transformer. Isolation also referred to as galvanic isolation, implies that no direct path exists for the current to flow from the source to the load. An isolation transformer provides isolation between the electrical devices and the source powering these devices. In other words, with an isolation transformer, the output power circuit is electrically and physically isolated from the input power circuit. As a result, the isolation transformer provides safety to the users and the appliances by preventing the current to pass to the body of the product, hence making it very safe.

Automatic Bypass

Automatic Bypass is the ability of UPS to transfer the load to the mains electricity supply when there’s an internal fault or failure.

When there is a technical error in the UPS, it might not be able to switch the load back to the main supply automatically.

Su-vastika UPS with ATC has a feature of an ‘Automatic bypass system’ which bypasses the Mains supply even when the UPS is faulty.

LCD Display

LCD display is the display function of a UPS that shows key metrics to users to help them make an informed decision.

Su-vastika Premium UPS with ATC comes with a built-in LCD display that shows messages, including customized messages so that the user and service personnel can know what is happening inside the UPS and take the right action if required.

Various Type Of Settings In The Ups With ATC

There are lot of settings in this UPS the first.

1st is Wide UPS and UPS mode

2nd is Battery type selection

3rd is Grid Charging Current

4th is Battery Reserve Mode

5th is Buzzer on and off control

Last one is Alert Sound on the mobile phone.

Safe Voltage Range

A safe voltage range is important to keep appliances safe during high voltage variations and spike and surges. The problem is that there could be times when due to a high voltage, the appliances connected with the home wiring getting damaged but if those appliances are connected through our UPS then they are safe as this UPS has the sensing circuit in the microprocessor which keep sensing the voltage and frequency of the Mains power and the moment the High Voltage or Low Voltage is detected it shifts to UPS/battery mode to save the appliances.

With Su-vastika Pure sine wave UPS with ATC, your UPS has ability to maintain Safe Voltage ranges, hence the appliances will remain safe from high voltage spikes as it rapidly switches from the mains to the battery.

Ability To Charge At Low Voltage

Typically,  low voltage areas specially developing countries or war torn countries like Syria, Afghanistan, Iraq, Yemen, Sudan, Somalia, Ethopia, Pakistan, Cameroon and Nigeria etc. experience high voltage fluctuations because of grid is not stable and these countries’ people face lot of appliances getting damaged. Due to these voltage fluctuations, battery charging in the UPS is a tough thing to happen. To avoid this problem, people use Voltage stabilizer along with the Inverter/UPS to charge the battery.

Su-vastika Pure sine wave UPS with ATC is equipped with Advanced Microprocessor which take care of this issue and charge the battery at as low voltage as 90 Volts without any Voltage stabiliser and can charge properly at higher voltage like 280Volts which is a major feature of our UPS with ATC model.

Advanced Protection With MCB

A safe voltage range is important to keep appliances safe during high voltage spikes. Short circuits are very common. Therefore every household is equipped with an MCB or main fuse. However, these can be slow and inefficient at protecting your appliances from damage. We know how much you love your appliances. Therefore, we have designed Our PURE SINE WAVE UPS 2300/24V LED to give them a smart layer of protection. It has an inbuilt Special MCB, which trips and protects all your appliances before the traditional MCB can respond.

Safe By Pass Mode For Voltage And Frequency Coming From The Mains Power

We have provided the feature of By pass Load, which is higher than the normal capacity of UPS. This feature  helps the user to keep the provision of higher load so that one can get the UPS connected to the whole house or office and can choose which load to run when the power is not available.

This feature allow the user to install the UPS on the whole house load and all those appliances connected with this UPS get the protection of High and Low Voltage protection along with the Frequency variation protection as well, which cant be provided by the MCBs installed in the home or offices.

Load Percentage

User can see percentage of load running on LCD display  and can Monitor & Optimise Inverter/UPS Health.

Stay informed about the current load on your UPS without needing to approach it physically. Detect overloads and make informed decisions to reduce the load for optimal performance. Identify the wattage of individual devices and manage their power consumption effectively. Ensure the health of your UPS by maintaining a balanced load percentage and upgrade if necessary.

Soft Start (Gentle To Your Appliances)

A great beginning makes way for a great journey. Our UPS knows this very well. Unlike traditional inverters that allow a sudden inrush of current which can be harmful to your appliances, Su-vastika’s UPS goes for a cushioned start-up. It gradually increases the voltage to let your appliances ease-in. This prevents electrical and mechanical shocks to the sensitive and costly appliances in your house.

Safe Discharge

With prolonged usage, a battery’s life gets reduced. This is what happens to every battery after multiple charge-discharge cycles, even inverter batteries. Nerds call it battery fatigue. Our UPS knows how to beat this problem too. When the battery is being used to power your home and is about to get empty (but not fully empty), Pure Sine Wave UPS places a reserve. This means it doesn’t let the battery get fully or deeply discharged, hence extending the life of the battery.

Battery Size Selection

Every battery is built to accept a certain maximum allowed charging speed. A Tubular Lead-Acid battery needs a minimum of 10 hours, a Sealed Maintenance Free (SMF) battery requires 6-8 hours, while a Lithium-lon battery requires 2-4 hours to get fully charged healthily. Charging the batteries faster than these healthy limits reduces the battery’s life and increases maintenance costs and hassles. That’s why Pure Sinewave UPS with ATC is built with the Right Charger that charges batteries at optimum speed.

Battery Selection Switch is an innovative feature of Pure Sinewave UPS with ATC that enables you to select the battery charging current for choosing a small to a big battery. So, in other words, if you need a short backup time, you can select a small battery; if you need a long backup, you can choose a bigger one. We have two ways of selecting battery charging one is with the DIP switches, and the other is a Mobile app in which you can choose the charging current in the settings.

Overload & Short-circuit Protection

We have given a special overload feature in which when the ups once get overloaded will give 8 times retry before it shuts down. This feature is very important for the customer as when the costumer put extra load which cannot be supported by the ups then it switch off immediately and keep giving warning. Then customer has to reduce the load and go to the ups and reset the front switch which is very uncomfortable for the costumer because at times the whole house gets into darkness and for the costumer to switch off the load and reaches to the ups is tough as it laying in one corner of the house or office. So we have given a special feature in our ups, in case of overload our ups gives you 8 times switching on and off load, in that timing costumer can reduce the load and there is no sudden darkness in the house/office. Just like overload retries our UPS has a feature of short circuit retries as well. In this feature whenever there is a short circuit our UPS will shut down automatically and start again. In this process our UPS will check whether the condition of short circuit has been eliminated or not if the short circuit has been eliminated the UPS will start working normally and if condition of short circuit continues then our UPS will retry 4 times before permanently shut down. In order to make it operational again, one needs to reset the front switch of UPS.

Low Battery Warning

Low Battery Warning in Su-vastika UPS helps to Protect Batteries and Ensure Power Reliability.

Learn about the importance of low battery warnings and how they safeguard batteries from damage while ensuring uninterrupted power supply. Explore the difference between low-voltage battery cut offs for lead acid and lithium batteries, as well as how the Su-vastika Inverter/UPS employs this safety feature to provide timely alerts and prevent deep discharge. Discover the benefits of implementing low-voltage battery cut offs in critical applications to maximize battery life and maintain reliable backup power systems.

Compatible With Local Generator

Many times when the local grid fails, you need to depend on your Domestic Power Generators. Ordinary inverters are incompatible with such ACs due to their high fluctuations. But Su-vastika’s UPS can normalize and adapt to such fluctuations, making it perfect to pair up with Domestic Generators because our UPS has a frequency bypass range of 42Hz – 55Hz.